beat365官网

济南立强模具备限beat365官网公司是一家供给济南注塑模具注塑加工等产物的山东模具制作厂家

山东济南注塑模具制作加工

     

您此刻的地位: beat365官网官网>>消息静态>>若何下降注塑加工时的能耗题目呢?

若何下降注塑加工时的能耗题目呢?

来历:beat365官网:http://es2c.com 日期:2020-08-10 宣布人:liqiang 阅读次数:
济南注塑加工的进程,长短常花费质料的,那末是不是有甚么方式能够下降注塑加工时的能耗题目呢?明天济南注塑加工小编就来简略的为大师先容一下。
Jinan injection molding process, is very expensive raw materials, so is there any way to reduce the energy consumption of injection molding processing? Today, Ji'nan injection molding processing small knitting to a simple introduction for you.
对一家注塑成品厂而言,注塑成型进程所占有的能耗约莫占到60%,因此有用下降注塑机的能耗是注塑工场节能的首要路子。跟着注塑机自身节能手艺的不时晋升,下降注塑工场全体能耗须要从出产办理、加工工艺与物料、出产车间配套等方面周全斟酌。
For an injection molding factory, the energy consumption of injection molding process accounts for about 60%, so effectively reducing the energy consumption of injection molding machine is an important way to save energy in injection molding factory. With the continuous improvement of energy-saving technology of injection molding machine itself, reducing the overall energy consumption of injection molding plant needs to be comprehensively considered from the aspects of production management, processing technology and materials, production workshop matching, etc.
济南注塑加工
Injection molding in Jinan
出产车间的规划首要从两个方面斟酌:在知足出产须要的环境下,在按照出产工艺优化规划的同时,知足特定出产前提下矫捷利用的请求。
The layout of production workshop is mainly considered from two aspects: under the condition of meeting the production demand, optimizing the layout according to the production process, and meeting the requirements of flexible application under specific production conditions.
1、供电时,为了知足不变出产用电的须要,同时要有恰当的裕度,不能因功效耗损过量而形成用电过量。
1. In power supply, in order to meet the needs of stable production power consumption, at the same time, there should be appropriate margin to avoid excessive power consumption due to excessive functional consumption.
2、扶植冷却水轮回举措措施,为冷却水体系装备有用的保温隔热体系。
2. Construction of efficient cooling water circulation facilities, cooling water system equipped with effective insulation system.
3.优化车间的全体出产规划。很多出产进程是按挨次调和的。公道的工位调和能够削减周转所需的时候和能耗,进步出产效力。
3. Optimize the overall production layout of the workshop. Many production processes are coordinated in sequence. Reasonable station coordination can reduce the time and energy consumption needed for turnover and improve production efficiency.
4.照明和其余工场装备应尽能够由有用的小型装备零丁节制。
4. Lighting and other plant equipment shall be controlled separately by effective small equipment as far as possible.
5.对车间装备停止按期保护,避免破坏大众举措措施,影响出产一般运转,进一步增添能耗。
5. Carry out regular maintenance of workshop equipment to avoid damaging public facilities, affecting normal production operation, and further increase energy consumption.
6.济南注塑加工倡议有前提利用无尘车间,车间做好5S任务,避免粉尘破坏机器紧密部件。
6. It is suggested to use dust-free workshop for injection molding in Jinan. The workshop should do 5S work well to prevent dust from damaging mechanical precision parts.

相干消息

beat365官网地点: 济南市天桥区承平庄药山镇丁庄产业园8号; 网址:beat365官网:http://es2c.com  传真:0531-61388458   手机:18610627886

济南立强模具备限beat365官网公司     手艺撑持: 流量统计:

豪运国际 韦德官方网站 趣购彩 豪运国际手机登录大厅 好运彩 满堂彩